Amico Falcon Combo Arm User Manual
Page 17
www.amico.com 17
SECTION 3: Device Installation
Mouse/Scanner Holder Installation
WARNING
Do not rest excessive weight on keyboard tray. It is rated for up to 15 lbs (7 kg) max.
WARNING
Ensure that the AHM is in the highest vertical position and locked before mounting or removing
devices from the FIT.
NOTE:
See Page 25 for instructions on locking and unlocking the AHM
The Keyboard tray comes with a mouse/scanner holder. The keyboard tray contains a sliding mouse
tray as well as mousepads. Amico Accessories also provides wrist rests and other accessories, however
those must be purchased separately.
The Keyboard Tray can rotate side to side and can be folded up. It is
recommended to keep keyboard accessories & other accessories in the mouse/scanner holder.
NOTE:
The mouse/scanner holder is a plastic basket. It is placed in between the swivel post and the keyboard tray for
easy access. (Figure 1)
1. Place the mouse/scanner holder on the block between the swivel post and the keyboard tray, the holder should
snap onto the sides of the block as well as into the keyhole in the center (Figure 1).
(Figure 1)
Swivel
Post
Swivel
Block
Mouse/Scanner
Holder
Keyboard
Tray