Amico Falcon Combo Arm - Manual (Page 22)

22 Amico Accessories Inc.
SECTION 3: Device Installation
ARS Rail Cable Management
NOTE: An ARS cable guide is available to facilitate routing of cables along the Rails and is not provided by default
with the FIT Station.
1. Depending on where your CPU is mounted, guide the cables from the FIT station into the side of the channel
leading to your CPU. (Figure 1)
2. Depending on where your electrical outlets are, guide the power cables from the FIT station into the side of the
channel leading to your electrical outlets. (Figure 1)
3. Guide the ARS rail cable cover into the channel over the cable. Ensuring no cable is pinched between the rail
and the cover. Safely trim off any excess MRS cover after installation.
(Figure 1)