Amico Falcon Combo Arm User Manual
Page 31
Advertising
www.amico.com 31
Negative Tilt Knob
NOTE:
Negative Tilt knob is designed to tilt the BACK/REAR of the keyboard Tray down, and the FRONT of the
keyboard upwards.
WARNING
Do not rest weight on keyboard tray while adjusting the negative tilt knob, doing
so may deform keyboard arm.
1. To raise the angle of the keyboard, tilt the keyboard upwards until desired angle is achieved by hand, then turn
the Negative Tilt knob clockwise until the knob cannot turn anymore. (Figure 1)
2. To lower the angle of the keyboard, turn the negative tilt knob counterclockwise, the keyboard tray should
began lowering on its own. Continue turning the knob until desired angle is achieved. (Figure 1)
(Figure 1)
Negative Tilt Knob
Lowers
Raise
SECTION 4: Adjustments
Advertising