B&G Zeus Touch 12 - Manual (Page 107)

106 |
Maintenance | Zeus Touch Operator Manual
Trouble shooting
Failure Corrective action
One or more functions do not operate as
normal Perform a back to factory as described in
“Restore defaults” on page 84
Normal operation is not possible and back
to factory does not fix the problem Switch off the unit, press and hold the
zoom in and out keys and switch on the
unit. Release the zoom keys after some 5-6
seconds. A second beep confirms the reset
Backing up your system data
Waypoints, routes, tracks that you create are filed on your system. It is recommended to
regularly copy these files and your system settings files as part of your back-up routine.
The files are copied to a Micro-SD card inserted in the card slot on the front of your unit.
Different output formats are available:
User Data File version 4 This is best used when transferring data from one
system to another, since it contains all the extra tid
bits of information these systems store about items.
User Data file version 3 ( with depth) Should be used when transferring user data from
your system to a legacy system)
User data file version 2 (no depth)
GPX (GPS Exchange)
This is the format most used on the web that shares
among most GPS systems in the world. Use this
format if you are taking data to a competitors unit.
Northstar.dat (no Tracks) Used to transfer data to a legacy Northstar device.
The example shows how to export waypoints, routes and tracks. Selection is done by using
the rotary knob or the menu.
1. Select files
2. Press the rotary knob to access the export dialog, and select the file format you want to
export to
3. Select destination folder
4. Enter name for exported file