Audio – B&G Zeus Touch 12 User Manual

Page 78

Advertising
background image

| 77

Audio |

Zeus Touch Operator Manual

Audio

When the Zeus Touch is connected to a SonicHub server you can use your unit to control
audio playback from iPod, iPhone, USB mass storage device (mp3) and AM/FM radio. Before
playing FM radio through the SonicHub, you must purchase a marine-grade AM/FM antenna.
When connected to a WM-2 Satellite module you can subscribe and include Sirius™ audio
on your Zeus Touch system. Sirius™ audio and weather service covers inland US waters and
coastal areas into the Atlantic and Pacific oceans, Gulf of Mexico and the Caribbean Sea. The
Sirius™ audio products received vary depending on your selected subscription package. For
more information refer to

www.sirius.com

.

Before you can start using your equipment, it must be installed according to the Installation
manual included with the unit.

Enabling audio

You must enable audio to control audio on your
Zeus Touch unit.

The audio media bar

When audio is enabled, the media bar will appear at the bottom of the screen on all pages.
The media bar varies from one audio source to another.

Volume level

Media bar

Panel buttons

You switch focus between other panels and the media bar by tapping on the selected panel.

The audio menus

When you tap the media bar, the audio panel buttons are displayed. Tapping the screen again
makes these go away.
When the media bar is active you can display the full audio menu by:

MARK

MENU

Pressing the MENU key

Tapping the

MENU

panel button

Pressing and holding on the media
bar

The menus differs from one audio source to another as shown in the following sections.

13

Advertising
This manual is related to the following products: