B&G Zeus Touch 12 - Manual (Page 71)

70 |
The Instruments panels | Zeus Touch Operator Manual
The Instruments panels
The instrument panels consists of multiple gauges - analog, digital and bar - that can be
customized to display selected data. The instrument panel displays data on dashboards, and
you can define up to ten dashboards within the instrument panel.
¼ Note! To include fuel/engine information, engine and tank information has to be
setup from the Settings panel.
The dashboards
Three dashboard layouts are predefined to display gauges showing information about vessel,
navigation information and angler requirement.
You switch between a panel’s dashboards by tapping the left and right side of the panel, or by
selecting the dashboard from the menu.
Vessel dashboard Navigation dashboard Angler dashboard
¼ Note: Additional dashboards can be activated. Refer “Edit an Instrument dashboard” on page
70.
Customizing the Instrument panel
You can customize the Instrument panel by changing the data for each of the gauges in the
dashboard, by changing the dashboard layout, and by adding new dashboards. You can also
set limits of analog gauges.
All edit options are available from the Instrument panel menu.
Available editing options will depend on which data sources that are connected to your
system.
Edit an Instrument dashboard
Select the dashboard you want to edit, then;
1. Activate the menu
2. Select the edit option
3. Tap and hold on the gauge you want to change. The selected gauge will have a red outline
4. Select info to display
Save your changes by using the menu or by tapping the Finish editing panel button.
You can also use the rotary knob to select menu item and gauges.
11