B&G Zeus Touch 12 - Manual (Page 35)

34 |
Using the Autopilot | Zeus Touch Operator Manual
Compass symbol on the chart panel
You can select to show a compass symbol around your boat on the
chart panel. The compass symbol will be off when the cursor is active
on the panel.
The Autopilot panel
The Autopilot panel is used to display information when you are
navigating. It replaces the Autopilot pop-up when used in full screen, or on any pages where
it is used as a split pane. The Autopilot mode indication bar will also not be shown when the
Autopilot panel is used.
The shortcut icon used to activate the Autopilot panel is by default available on the Pages
panel. The panel can however only be used when an autopilkot computer is available on the
network.
Data fields
The Autopilot panel shows destination name, heading and rudder information. The following
abbreviations are used:
CTS
Course to steer
DTD Distance to destination
SOG Speed over ground
COG Course over ground
DTW Distance to next waypoint
XTE Cross track error
Selecting Autopilot modes
You select an automatic mode or a feature from the Autopilot Mode selection menu,
activated by tapping the mode icon or by pressing the MENU key.