B&G Zeus Touch 12 - Manual (Page 20)

| 19
Charts | Zeus Touch Operator Manual
Rotating the 3D chart
In rotate view mode the camera position is fixed, and the camera can only be rotated and
tilted.
By default the vessel’s position will be in the center of the view, or towards the bottom if Look
Ahead is enabled. The camera angle is as seen from your eye position, looking toward the
vessel. The vessel’s rotation on the chart is defined by the chart orientation settings.
You can change the camera’s tilt angle by dragging your finger on the screen with vertical
motions. You rotate the camera around its own vertical axis by dragging your finger
horizontally on the screen.
¼ Note: You can only rotate the camera if you have panned away from default vessel position,
that is when the Return to vessel panel button is available.
Panning
The Pan option allows you to view the entire 3D chart, regardless of vessel position.
Move the camera away from the vessel and around in the chart by dragging your finger on
the screen. When you remove your finger from the screen the view will remain in the selected
position.
The camera’s tilt angle is as set in
Rotate view.
Zooming
Zoom in and out on a 3D chart by using the IN/OUT keys or the rotary knob.
Insight chart options
Chart orientation
See page 16.
Look ahead
This option centres the chart slightly forward of your vessel so that you can maximize your
view ahead.
3D
See page 1620, 3D charts.
Chart imagery style
The charts can be displayed in two different imagery styles, either as 2D basic mapping style,
or with shaded relief presenting chart including terrain imaging.
2D Shaded relief