B&G Zeus Touch 12 - Manual (Page 73)

72 |
The Instruments panels | Zeus Touch Operator Manual
Editing a data history page
All of the data windows can be configured to show the data you require via the edit option in
the menu.
5. Select the data field you wish to change.
6. Select the required information.
7. Save changes will return you to the wind and time plot screen, displaying the new
configuration. You can cancel the changes at anytime before you save by selecting cancel.
Missing Data
If instrument data is unavailable the time plot will turn into a dashed line and flatten out at
the point data was lost.
When data becomes available again a dashed line will join up the two points showing an
average trend line where the missing data is.
¼ Note: Barometric Pressure data is retained on the unit even if power is switched off. This
enables the unit to display data from a previous day. Data is not recorded whilst the unit is off.