B&G Zeus Touch 12 - Manual (Page 24)

| 23
Waypoints, routes & tracks | Zeus Touch Operator Manual
Waypoints, routes & tracks
Waypoints
A waypoint is a user generated mark positioned on a chart, on a radar image or on an
echosounder image. Each waypoint has an exact position with latitude and longitude
coordinates. A waypoint positioned on an echosounder image, will in addition to position
information have a depth value.
A waypoint is used to mark a position you later may want to return to. Two or more waypoints
can also be combined to create a route.
Positioning waypoints
Placing a waypoint at vessel position
You can position a waypoint at the vessel position from any panel by pressing and holding
the MARK / MENU key.
Using the cursor to position waypoints
On chart, echosounder and StructureScan panels you can place a waypoint on a selected
position by tapping the screen and then activating the panel menu.
Edit waypoints
A selected waypoint can be deleted or edited on a chart panel from the menu, or from the
waypoint dialog.
You can quickly move a waypoint on a chart panel by tapping the desired new location on
the screen.
Using the edit waypoint dialog
This dialog is activated by tapping the waypoint and then activating the menu, or pressing
the rotary knob when the waypoint is selected.
The dialog can also be activated from the Waypoint list. See
“The waypoints, route and tracks panels” on page 25.
Waypoint alarm settings
You can set an alarm radius for each individual
waypoint you create.
¼ Note: The waypoint radius alarm must be toggled ON in the
alarm panel to activate an alarm when your vessel comes within the defined radius.
4