Baseline Systems BaseManager 2.0 - Manual (Page 15)

Adding Flow Meters
1. In the main BaseManager interface, select the site and controller that you want to add flow meters to.
a. From the list under the All tab on the left side of the map, click the site. The controllers assigned to that
site are listed below the site name.
b. Click the controller that you want to work with. A blue arrow displays next to the controller that is
selected.
2. Position the cursor on the Devices tab, and then click Flow in the menu that displays.
3. Click the Search For Flow Meters button. The Search and Assign Flow Sensors page displays.
4. In the Serial Number column for an unassigned ID, click the arrow, and then click the serial number of the flow
meter that you want to assign. The serial number that you selected displays in the Serial Number column.
5. Click in the Description column and type a description that makes the flow meter easy to identify.
Note: Limit the number of characters in the description to 32 characters (BaseStation 1000) or 42 characters
(BaseStation 3200). If you enter a longer description, the controller will automatically shorten it, and then pass
the new version back to BaseManager.
6. Repeat steps 4 and 5 until you have assigned all flow meters.
7. Scroll to the bottom of the page and click the Save and Finish button. The flow meters display in the table.
Adding Master Valve Decoders
1. In the main BaseManager interface, select the site and controller that you want to add master valve decoders
to.
a. From the list under the All tab on the left side of the map, click the site. The controllers assigned to that
site are listed below the site name.
b. Click the controller that you want to work with. A blue arrow displays next to the controller that is
selected.
2. Position the cursor on the Devices tab, and then click Master Valves in the menu that displays.
3. Click the Search For Master Valves button. The Search and Assign Master Valves page displays.
4. In the Serial Number column for an unassigned ID, click the arrow, and then click the serial number of the
master valve decoder that you want to assign. The serial number that you selected displays in the Serial
Number column.
5. Click in the Description column and type a description that makes the master valve decoder easy to identify.
Note: Limit the number of characters in the description to 32 characters (BaseStation 1000) or 42 characters
(BaseStation 3200). If you enter a longer description, the controller will automatically shorten it, and then pass
the new version back to BaseManager.
6. Repeat steps 4 and 5 until you have assigned all master valve decoders.
7. Scroll to the bottom of the page and click the Save and Finish button. The master valve decoders display in the
table.