Baseline Systems BaseManager 2.0 - Manual (Page 27)

Operating Your Controller from BaseManager
Setting a Rain Delay for the Controller
1. In the main BaseManager interface, select the site and controller that you want to set a rain delay for.
a. From the list under the All tab on the left side of the map, click the site. The controllers assigned to that
site are listed below the site name.
b. Click the controller that you want to work with. A blue arrow displays next to the controller that is
selected.
2. Perform one of the following tasks:
• Position the cursor on the Maps tab, and then click Current Controller. On the map, right-click on the
controller icon, and then click the Rain Delay option.
• Click the Set Controller Rain Delay button under the tabs at the top of the BaseManager page.
3. In the Rain Delay dialog box, type a number in the Delay field, and then click the Ok button. The color of the
box that displays the controller name changes to gray to indicate that the controller is off.
Turning Off a Rain Delay
1. In the main BaseManager interface, select the site and controller that you want to turn off a rain delay for.
a. From the list under the All tab on the left side of the map, click the site. The controllers assigned to that
site are listed below the site name.
b. Click the controller that you want to work with. A blue arrow displays next to the controller that is
selected.
2. Perform one of the following tasks:
• Position the cursor on the Maps tab, and then click Current Controller. On the map, right-click on the
controller icon, and then click the Rain Delay option.
• Click the Set Controller Rain Delay button under the tabs at the top of the BaseManager page.
3. In the Rain Delay dialog box, type a zero in the Delay field, and then click the Ok button. The color of the box
that displays the controller name shows the current status.
Setting a Global Rain Delay
1. To set a rain delay for all controllers in your BaseManager account, click the Set Global Rain Delay button in
the upper-right of the BaseManager page.
2. In the Rain Delay dialog box, type a number in the Delay field, and then click the Ok button. The color of the
box that displays the controller name changes to gray to indicate that the controller is off.