Baseline Systems BaseManager 2.0 - Manual (Page 29)

2. Position the cursor on the Maps tab, and then click Current Controller.
3. Position the cursor on the icon of the device that you want to test, and then click the right mouse button.
4. Click the Test Device option. The test results display in a pop-up box.
5. When you have finished reviewing the results, click Done.
Displaying a Graph for a Device
1. In the main BaseManager interface, select the site and controller that you want to display a device graph for.
a. From the list under the All tab on the left side of the map, click the site. The controllers assigned to that
site are listed below the site name.
b. Click the controller that you want to work with. A blue arrow displays next to the controller that is
selected.
2. Position the cursor on the Maps tab, and then click Current Controller.
3. Position the cursor on the icon of the device that you want to display a graph for, and then click the right
mouse button.
4. Click the View Graph option. The graph displays in the BaseManager page.
5. When you have finished reviewing the graph, click the Return button.
Manually Running a Zone
1. In the main BaseManager interface, select the site and controller that you want to manually run a zone for.
a. From the list under the All tab on the left side of the map, click the site. The controllers assigned to that
site are listed below the site name.
b. Click the controller that you want to work with. A blue arrow displays next to the controller that is
selected.
2. Position the cursor on the Maps tab, and then click Current Controller.
3. Position the cursor on the icon representing the device that you want to manually run, and then click the right
mouse button.
4. In the field next to the Start Zone button, click the arrow to set the amount of time for the manual run.
5. Click the Start button. The icon color changes to show that the zone is running.