Cooper Instruments & Systems DFI INFINITY B Ultra High Performance Digital Force Indicator - Manual (Page 34)

"SP 3", "SP3’s value"
"SP 4", "SP4’s value"
"RUN".
Press ‘▲/MAX’ 4) Enables the user to select and modify first, or flashing digit of the setpoint value.
Press ‘▲/MAX’ 5) The digit will change in this following cycle: 0 to 9, - (minus sign).
Press ‘►/MIN’ 6) To select the next downward digit to modify.
Press ‘SETPTS’ 7) Display shows "StOREd" stored message momentarily (to save the new value if a change was
made) then advances to next item "SP2" Setpoint 2.
Press ‘SETPTS’ 8) Continue pressing ‘SETPTS’ to access next setpoint and return to RUN Mode.
The display Menu will advance to the next setpoints menu item about 10 seconds at any
step within this menu and the new value of setpoint will be stored automatically if a
change was made.
For more Setpoint Configuration and applications, refer to Section 21.
CF 156 29 M2544/N/0505