Yealink W52P - Manual (Page 28)

User Guide for the W52P IP DECT Phone
16
indicates the handset is registered successfully.
After successful registration, an internal handset number and handset name appear on
the LCD screen.
You can also register a handset via web user interface at the path
Status->Handset&VoIP.
To de-register a handset:
1. Press to enter the main menu.
2. Select ->Registration->De-reg. Handset.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
The LCD screen displays the names of the handsets registered to the same base
station. The name of the handset itself is highlighted and followed by a left arrow.
5. Press or to highlight the desired handset name, and then press the OK
soft key.
The LCD screen prompts “De-register Handset”.
6. Press the Yes soft key to de-register the handset or the No soft key to cancel.
To select the base station:
1. Press to enter the main menu.
2. Select ->Registration->Select Base.
The LCD screen displays all base stations the handset registered to and the
Bestbase option (if the handset is registered to more than one base station). The
radio box of the currently used base station is marked. You can select Bestbase to
search for the base station with the best signal strength.
3. Press or to highlight the desired base station or the Bestbase option, and
press the Select soft key.
The handset begins to search for base station. After successful connection, the
handset plays a warning tone and prompts “Base selected successfully!”.
You can highlight the base station the handset registered to, and then press the
Rename soft key to rename the base station name.
The base station attempts to contact a DHCP server in your network to obtain valid
network settings (e.g., IP address, subnet mask, gateway address and DNS address) by
default.
If the base station cannot contact a DHCP server for any reason, you need to configure
basic network settings manually.