Yealink W52P - Manual (Page 44)

User Guide for the W52P IP DECT Phone
32
You can search for the contacts by simply typing a few continuous characters of the
desired contact name or number, and the results of potential matches are dynamically
filtered and displayed on the LCD screen.
To search for contacts in the local directory:
1. Press to enter the main menu.
2. Select .
3. Enter a few continuous characters of the desired contact name or number using the
keypad.
The contact whose name or number matches the search will appear on the LCD
screen after a timeout or when the Search soft key is pressed. You can dial a
contact from the result list.
To place a call from the local directory:
1. Press to enter the main menu.
2. Select .
3. Press or to highlight the desired entry.
4. Do one of the following:
- If only one number is stored for the contact in the local directory, press to
dial out directly.
- If both the office number and the mobile number are stored for the contact in
the local directory, press the View soft key to display the two numbers.
Press or to highlight the desired number.
Press to dial out.
You can store up to 30 contacts in the handset‟s blacklist. You can add, edit or delete
contacts in the blacklist. You can also dial a call from the blacklist, but an incoming call
from a contact in the blacklist will be rejected automatically.
To add an entry to the blacklist manually:
1. Press to enter the main menu.
2. Press ->Telephony->Caller Blacklist.
3. Press the OK soft key.
If there is already an entry, press the Options soft key, and select New Entry.
4. Enter the desired number in the Phone Number field.