Yealink W52P - Manual (Page 32)

User Guide for the W52P IP DECT Phone
20
2. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
You can lock the handset keypad to prevent keys from being accidentally pressed.
To lock the keypad:
1. Long press when the handset is idle until the LCD screen prompts “Keypad
Locked, Press and hold „#‟ to unlock!”.
The keypad is locked and the icon appears on the idle screen.
You can still answer or reject incoming calls as usual. You can also end the
answered call by pressing .
To unlock the keypad:
1. Long press again until the LCD screen prompts “Keypad Unlocked”.
The keypad is unlocked and the icon disappears from the idle screen.
Note
You can locate a misplaced handset using the base station to which the handset is
registered.
To locate a handset:
1. Press on the base station.
All handsets registered to this base station will ring simultaneously (Paging) and
display the IP address of the base station on the LCD screen.
This helps you locate your handset easily.
You can press any key on the handset or press again on the base station to
end paging.
You can also locate handsets via web user interface at the path
Status->Handset&VoIP.
If the ringer volume is adjusted to the minimum, the icon will appear on the idle
screen.
If the keypad is locked, only the emergency numbers can be dialed out. You must enter
the emergency number continuously. To place emergency calls, you should configure the
emergency numbers in advance. For more information, refer to
Emergency Numbers on
page 40 .