Yealink W52P - Manual (Page 68)

User Guide for the W52P IP DECT Phone
56
To enable anonymous call feature for a specific line:
1. Press to enter the main menu.
2. Select ->Anonymous Call.
The LCD screen displays the outgoing lines currently assigned to the handset. The
default outgoing line is highlighted and followed by a left arrow.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to select Enabled from the Status field.
5. Press the OK soft key to accept the change.
To place an anonymous call:
1. Using the specific line on the handset to place a call.
The LCD screen of the phone receiving this call prompts an incoming call from
anonymity.
You can use anonymous call rejection feature to reject incoming calls from anonymous
callers. Anonymous call rejection automatically rejects
incoming calls from callers who
deliberately block their identities and numbers from showing up. You can configure
anonymous call rejection feature on a per-line basis.
To enable anonymous call rejection feature for a specific line:
1. Press to enter the main menu.
2. Select ->Anon.Call Rejection.
The LCD screen displays the incoming lines currently assigned to the handset.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to select Enabled from the Status field.
5. Press the OK soft key to accept the change.
You can leave voice mails to someone else. You can also receive and listen to voice
mails via the handset. Voice mail feature ensures that you will never miss any important
messages. When receiving a new voice mail, the icon appears on the LCD screen
with the number of unread voice mails, and the message key LED flashes red.
Note Voice mail feature is not available on all servers. Contact your system administrator for
more information.