Yealink W52P - Manual (Page 56)

User Guide for the W52P IP DECT Phone
44
call by pressing the Accept soft key.
To configure auto intercom:
1. Press to enter the main menu.
2. Select ->Telephony->Auto Intercom.
The LCD screen displays three configuration types.
3. Press or to highlight the desired configuration type, and press the
Change soft key.
The radio box of the selected configuration type is marked.
You can reset individual settings that you have made on the handset. Resetting handset
will not overwrite settings of directory, call history, voice mail and the handset
registration to the base station. Other customized settings on the handset will be reset to
factory settings after handset reset. We recommend that you ask your system
administrator for advice before resetting your handset.
To reset the handset:
1. Press to enter the main menu.
2. Select ->System Settings->Handset Reset.
The LCD screen prompts “Reset handset to default?”.
3. Press the Yes soft key to reset the handset or the No soft key to cancel.
You can reset the base station to factory settings. This will clear all individual settings of
the base station (e.g., directory and account registrations). Handset registrations and
the system PIN will not be reset to factory defaults. We recommend that you ask your
system administrator for advice before resetting your base station.
To reset the base station:
1. Press to enter the main menu.
2. Select ->System Settings->Base Reset.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
All individual settings of the base station are reset to factory defaults successfully.
The power indicator LED on the base station slow flashes during the resetting
process.
Note Base station reset may take a few minutes. Do not power off until the base station starts
up successfully.