Yealink W52P - Manual (Page 36)

User Guide for the W52P IP DECT Phone
24
The handset will be assigned a name by default if successfully registered to the base
station. You can personalize the handset name.
To rename the handset:
1. Press to enter the main menu.
2. Select ->Handset Name.
3. Edit the current name in the Rename field.
4. Press the Save soft key to accept the change.
The handset supports displaying text in different languages. The handset supports 11
languages: English, French, Turkish, Portuguese, Spanish, Italian, Deutsch, Polski, Czech,
Swedish and Hebrew. The default language of the handset is English. You can change
the language according to your requirement.
To change the language of the handset:
1. Press to enter the main menu.
2. Select ->Language.
3. Press or to highlight the desired language and press the Select soft key.
The LCD screen prompts “Change phone language to xxx?” (xxx is the language
you selected).
4. Press the Yes soft key to accept the change.
Text displayed on the handset will change to the selected language.
Note
Ring tones are used to indicate incoming calls. You can set different ring tones to
distinguish the incoming lines from each other on your handset. You can also set a ring
tone for an incoming intercom call. When receiving an incoming call, the handset rings
the specified ring tone.
To configure ring tones:
1. Press to enter the main menu.
2. Select ->Audio->Ring Tones->Melodies.
Languages available for selection depend on the language packs currently loaded to
the handset. Please contact your system administrator for more information on the
available languages of your handset.