Canon PIXMA MX870 User Manual
Page 137
Advertising
For details on ink lamp flashing speed, see
Checking the Ink Status
.
4.
Prepare the new ink tank.
(1)
Take a new ink tank out of its package, remove the orange tape (
) completely,
then remove the protective film (
) completely.
Important
Handle the ink tanks carefully. Do not drop or apply excessive pressure to them.
If the orange tape remains on the L-shape air hole (D), ink may splash or the machine may
not print properly.
(2)
Hold the ink tank with the orange protective cap (E) pointing up while being
careful not to block the L-shape air hole (D).
(3)
Slowly twist the orange protective cap (E) 90 degrees horizontally to remove it
off.
Page 137 of 1127 pages
Replacing an Ink Tank
Advertising