Canon PIXMA MX870 - Manual (Page 920)

Quiet mode setting
Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
Enabling this function reduces the noises generated in the following cases:
Copying
Printing from a memory card/USB flash drive
Printing from a PictBridge compliant device
Printing from a wireless communication device
Sending/receiving the fax
Printing a template form
Important
Operating speed may be reduced compared to when this setting is set to OFF.
This function may not be so effective depending on the machine's setting.
Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be reduced. To
reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to
Scanner Tab .
For the noises while printing from the computer, refer to Reducing the Machine Noise .
Guide display settings
Changes the time before the guidance is displayed on the LCD, or selects not to be displayed.
Key repeat
Enables/Disables continuous input by pressing and holding down the , , , or button when
setting the number of copies, changing the photo displayed on the LCD, setting the zoom ratio, etc.
Two-sided paper output setting
Selects the paper output setting for double-sided documents.
Output by page
Documents are ejected from the ADF in the original page order.
Fast - by back/front
Documents are ejected from the ADF with the front and back pages of each sheet in the reverse
order, to make the processing time shorter.
Page top
Page 920 of 1127 pages Device user settings