Canon PIXMA MX870 - Manual (Page 418)

Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Printing
Photographs Saved on a Memory Card > Setting Items
Setting Items
Print Settings Confirmation Screen
The LCD below is displayed when you press the right Function button in the Memory card mode.
Use the
button to change the setting item, and the button to change the setting.
Note
Depending on the functions, some setting items cannot be specified in combination. If the
setting items cannot be specified in combination, Error details is displayed on the LCD. In
this case, press the left Function button to confirm the message, then perform settings again.
1.
Page size
Select the page size of the loaded paper.
2. Type
Select the media type of the loaded paper.
3. Print qlty
Adjust print quality according to the original.
4. Border
Select bordered or borderless print.
5. Photo fix
When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and
the most suitable correction for each photo is made automatically. It makes a darkened face
by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person,
etc. and corrects each scene with the most suitable color, brightness, or contrasts
automatically to print.
Note
As a default, photos on the memory card are printed with auto correction applied.
If the print result with Auto photo fix selected for Photo fix is not satisfactory, select
Manual correction, then specify each advanced setting item.
Manual Correction Setting Screen
If No correction is selected, photos are printed without correction.
6.
Red-EyeCorrection
Corrects red eyes in portraits caused by flash photography.
Page 418 of 1127 pages Setting Items