Canon PIXMA MX870 - Manual (Page 38)

Note
Select an unoccupied number (A) to register a new number.
A message asking whether to edit or delete the registered information will appear if an
occupied number (B) is selected.
(2)
Use the Numeric buttons to enter the recipient's name (max.16 characters,
including spaces).
Note
For details on how to enter or delete characters, see Entering Numbers, Letters, and
Symbols .
(3)
Press the OK or button.
(4)
Use the Numeric buttons to enter the recipient's fax/telephone number (max.60
digits (40 digits for US, Canada, and Korea), including spaces).
(5)
Press the OK button.
The number will be registered to the One-Touch Speed Dial button.
(6)
Press the FAX button to return to the fax standby screen.
Sending a Fax with One-Touch Speed Dial
1. Prepare for sending a fax.
(1)
Make sure that the power is turned on.
See Operation Panel .
(2)
Load the original in the ADF or on the Platen Glass.
See Loading Originals .
(3)
Press the FAX button.
The fax standby screen will appear.
2. Adjust the scan resolution and contrast as necessary.
See step 2 in Sending a Fax with the Numeric Buttons .
3. Press the One-Touch Speed Dial button to which the recipient is registered.
The fax/telephone number registered to the One-Touch Speed Dial button will appear on the screen.
Note
Pressing the One-Touch Speed Dial button here sets the first recipient. If necessary, you
can next specify other recipients of the same fax (sequential broadcasting).
For details, refer to the on-screen manual:
Advanced Guide .
Page 38 of 1127 pages Sending Faxes