Dick SM-100 230V User Manual
Page 51
SM-100 belt grinder
15
Structure and function
6
6.3
Function
The belt grinder consists of two functional groups: A grinding arm
[1]
with the grinding belt [2] and a polishing station [8] with the
polishing wheel [9]
. The polishing station is mounted on the left
and the grinding arm is mounted on the right of the drive motor [4].
The drive motor sits on a base [6]. The switch [5] and the four
machine bases [7] are fixed to the base. The specified direction of
rotation for the polishing wheel [10] and the grinding belt [3] is
marked on the belt grinder.
6.4
Covers
Figure 6.2 –
Covering danger zones
[1]
Deflection plate
[2]
Left-hand side panel of the grinding arm
[3]
Right-hand side panel of the grinding arm
[4]
Front cover of the grinding belt
[5]
Left-hand side panel of the polishing wheel
[6]
Cover of the polishing wheel
1
2
3
4
5
6