Dick SM-100 230V - Manual (Page 67)

SM-100 belt grinder 31
Servicing and maintenance
9
1
Undo the fastening screws [2] of the right-hand side
panel [1],
2
push the side panel [1] to the rear and remove,
3
push the tensioning lever [4] in the direction of the arrow [5]
to relax it,
4
remove the grinding belt [3],
5
put on the new grinding belt so that the direction of rotation
indication on the grinding belt [6] matches the direction of
rotation of the belt grinder,
6
Install the individual parts in the reverse order.
9.3 Changing the polishing wheel
The polishing wheel must be changed if it is worn to below the
working area.
Replace the polishing wheel belt as follows:
Figure 9.6 –
Polishing wheel
[1]
Fastening screws for cover
[2]
Cover
[3]
Fastening nut
[4]
Flange cover
[5]
Polishing wheel
1 2 3 4 5