Dick SM-100 230V User Manual
Page 68
Advertising
SM-100 belt grinder
32
Servicing and maintenance
9
1
Undo the fastening screws [1] of the cover [2],
2
Remove the cover [2],
3
Undo the fastening nuts [3] of the flange cover [4],
4
Remove the flange cover [4],
5
Replace the polishing wheel [5],
6
Install the individual parts in the reverse order.
After finishing all repairs and servicing work, check that all dis-
mantled parts have been completely and correctly installed,
especially the covers.
Advertising