Dick SM-100 230V User Manual
Page 59
SM-100 belt grinder
23
Putting into operation
7
Switch on the belt grinder as follows:
1
Insert the plug into the socket.
2
Check the alignment of the belt running (see “Adjusting the
belt alignment and running” on page 19.).
3
Press the green button at the switch (Switches).
4
Check the direction of rotation when starting up the belt
grinder.
- The direction of rotation is given by arrows on the covers.
7.5
Switching off the belt grinder
1
Press the red switch (Switches, Pos. [1]).
2
Wait until the grinding belt and the polishing wheel stop.
WEAR SUITABLE CLOTHING
Rotating machine parts can catch unsuitable clothing or long hair.
Abrasive particles spun off the machine or loud machine noises
can damage eyes and ears.
Sharp and hot workpieces can cause injuries to hands.
Rotating abrasives can pull off pieces of clothing.
• Ensure good lighting is available,
• wear tight-fitting clothing,
• do not wear jewellery,
• wear a hair net on long hair,
• wear safety glasses or goggles,
• wear hearing protection,
• wear suitable protective gloves,
• do not touch rotating machine parts with parts of the body
covered with fabric.