Dick SM-100 230V - Manual (Page 54)

SM-100 belt grinder 18
Putting into operation
7
Adjusting the deflector plate
Adjust the distance [2] between the deflection plate [3] and the pol-
ishing wheel [1] to 2 mm.
• Adjust the distance using the star knob [4].
WARNING
Risk of injuries due to rotating machine parts
• The distance between the deflection plate and polishing
wheel (Adjusting the deflection plate) must be checked each
time before starting work using the belt grinder, and if neces-
sary readjusted.
Figure 7.2 –
Adjusting the deflection plate
[1]
Polishing wheel
[2]
Distance (2 mm)
[3]
Deflection plate
[4]
Star knob
1
2
3 4