Dick SM-100 230V - Manual (Page 64)

SM-100 belt grinder 28
Machining workpieces
8
8.2 Polishing workpieces
1
Hold the polishing paste against the polishing wheel while it
is running,
2
Position the knife slanted relative to the running direction,
3
Position the knife at the polishing wheel at a more obtuse
angle than for grinding,
4
Grind the knife until the burr has been completely removed
and the surface has the required polish.
Figure 8.3 –
Polishing knives
[1]
Positioning angle slanted relative to the running direction
(forming an angle of approx. 30° - 60°)
[2]
Positioning angle relative to the polishing wheel (approx. 20°)
1
2