Dick SM-100 230V - Manual (Page 61)

SM-100 belt grinder 25
Machining workpieces
8
8. Machining workpieces
8.1 Grinding workpieces
Grinding zones
Figure 8.1 –
Grinding zones
[3]
Grinding with underlay for straight grinding
[4]
Grinding on the free belt for convex grinding (also called
crowned grinding)
1
2
NOTE
Dirty knives can irreparably damage the grinding belt and
polishing wheel. The surfaces can heat with long-term use.
• Only machine clean knives.
• Switch off the belt grinder after 30 minutes at the latest.