Dick SM-100 230V - Manual (Page 55)

SM-100 belt grinder 19
Putting into operation
7
Adjusting the belt alignment and running
Adjust the belt as follows:
DAMAGE TO THE BELT GRINDER DUE TO SKEW RUNNING
GRINDING BELT!
A misaligned, skew-running belt damages the housing.
• Before switching on the belt grinder, check the running of the
grinding belt, to ensure it is straight.
Figure 7.3 –
Grinding arm
[1]
Right-hand side panel
[2]
Fastening screws
Figure 7.4 –
Belt alignment and running
[3]
Adjusting screw
1
2
2
3