Dick SM-100 230V User Manual
Page 52
SM-100 belt grinder
16
Putting into operation
7
7.
Putting into operation
7.1
Installing the belt grinder
WARNING
Risk of injuries in the event of slipping, falling or tilting belt
grinder
• Install the belt grinder on a stable table or other stand or sub-
structure, which has sufficient stability to carry the weight of
the belt grinder.
• The stand must not be mobile or fitted with wheels or castors.
• Install the belt grinder on a flat, slip-proof surface so that the
belt grinder does not slip, tilt or otherwise move when used.
WARNING
Risk of injuries in case of a posture in which the user can-
not maintain their balance
• Adjust the height of the base unit to the height of the operator
so that they work in an upright, stable position, in which they
are able to maintain their balance.