FORD 2013 Explorer v.3 - Manual (Page 206)

Stopping the Engine When Your Vehicle is Moving
1. Press and hold the start button for at least one second or press the
start button three times within two seconds.
2. Shift to position N and use the brakes to bring the vehicle to a safe
stop.
3. After the vehicle has stopped, turn the engine off and shift into
position P.
WARNING: Switching off the engine when the vehicle is still
moving will result in a loss of brake and steering assistance. The
steering will not be locked, but higher effort will be required. When the
ignition is switched off, some electrical circuits, warning lights and
indicators may also be off.
Fast Restart
If a valid key is not present, the fast restart feature allows you to restart
your vehicle within 20 seconds of switching it off. Press the brake pedal
and press the start button within 20 seconds. After 20 seconds have
expired, you can no longer start your vehicle without the key present
inside the vehicle.
Once your vehicle has started, it remains running until you press the
start button, even if a valid key has not been detected. If you open and
close a door while your vehicle is running, the system searches for a
valid key. You cannot start your vehicle if a valid key is not detected
within 20 seconds.
Your vehicle may have remote start capability. Refer to Remote start in
the Keys and Remote Control chapter.
STARTING A GASOLINE ENGINE
When the engine starts, the idle RPM runs faster to warm the engine. If
the engine idle speed does not slow down automatically, have the vehicle
checked.
Before starting the vehicle:
• Make sure all occupants buckle their safety belts.
• Make sure the headlamps and electrical accessories are off.
• Make sure the parking brake is set.
• Make sure the gearshift is in position P.
• Turn the ignition on without starting the engine.
Starting and Stopping the Engine 205
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)