FORD 2013 Explorer v.3 - Manual (Page 207)

Some warning lights will briefly illuminate.
Note: Do not touch the accelerator pedal.
1. Fully press the brake pedal.
2. Select position P or N.
3. Start the engine. The engine may continue cranking for up to
15 seconds or until the vehicle starts.
Note: If the engine does not start on the first try, wait for a short period
of time and try again.
If you have difficulty starting the engine when the temperature is below
-13°F (-25°C), press the accelerator pedal slightly and try again.
If the engine does not start after three attempts, wait 10 seconds and
follow this flooded engine procedure.
1. Fully press the brake pedal.
2. Fully press the accelerator pedal and hold it there.
3. Select position P or N.
4. Start the engine.
If your vehicle is equipped with a push button start system, refer to
Keyless starting in this section for ignition modes.
Guarding Against Exhaust Fumes
WARNING: If you smell exhaust fumes inside your vehicle, have
this checked immediately. Do not drive your vehicle if you smell
exhaust fumes. Carbon monoxide is present in exhaust fumes. Take
precautions to avoid its dangerous effects.
Important Ventilating Information
If you stop your vehicle and leave the engine idling for long periods of
time, we recommend that you do one of the following:
• Open the windows at least 1 inch (2.5 centimeters).
• Set your climate control to outside air.
206 Starting and Stopping the Engine
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)