FORD 2013 Explorer v.3 - Manual (Page 257)

WARNING: Do not use in poor visibility, specifically fog, rain,
spray or snow.
Note: It is the driver’s responsibility to stay alert, drive safely and be in
control of the vehicle at all times.
The system is designed to automatically adjust your speed to maintain a
proper distance between you and the vehicle in front of you in the same
lane. The driver can select from one of four GAP settings, the controls
are located on the steering wheel.
At startup, the system sets the gap to the last selected setting. Once
activated, the driver can deactivate the system at any time by pressing
the brake pedal, pressing the steering wheel ON/OFF control or pressing
the RES/CNCL control. In addition, the driver can temporarily increase
the vehicle speed above the current speed by manually pressing on the
accelerator pedal.
The controls for using your cruise
control are located on the steering
wheel.
Setting Adaptive Cruise Control
1. Press and release ON.
The information display will show
the gray indicator light, current gap
setting and SET.
2. Accelerate to the desired speed.
3. Press SET upward and release. The vehicle speed will be stored in
the memory.
The information display will show a green indicator light,
current gap setting and desired set speed.
SET
RES
CNCL
ON
OFF
GAP
256 Cruise Control
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)