FORD 2013 Explorer v.3 - Manual (Page 44)

Rear outboard inflatable safety belts (second row only–if equipped)
• Buckle the combination lap and shoulder
belt.
• Grasp the lap portion of the belt and pull
upward until the entire belt is pulled out.
• Allow the belt to retract. As the belt
retracts, you will hear a clicking sound. This
indicates the safety belt is now in the
automatic locking mode.
How to disengage the automatic locking mode: Disconnect the
combination lap and shoulder belt and allow it to retract completely to
disengage the automatic locking mode and activate the vehicle sensitive
(emergency) locking mode.
Safety Belt Extension Assembly
WARNING: Do not use extensions to change the fit of the
shoulder belt across the torso.
WARNING: Do not use extensions with an inflatable safety belt.
Safety belt extensions are vehicle specific. Please see an authorized
dealer to ensure you obtain the proper safety belt extension for your
vehicle. Use only extensions manufactured by the same supplier as the
safety belt. A safety belt extension is not available for the inflatable
safety belt. Also, use the safety belt extension only if the safety belt is
too short for you when fully extended.
Safety Belts 43
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)