Trailer hitch cover, 292 towing – FORD 2013 Explorer v.3 User Manual
Page 293
Trailer Towing Connector (Vehicles Equipped with a Trailer
Towing/Prep Package)
The trailer towing connector is located under the rear bumper, on the
left side of the vehicle.
Color
Function
1. Dark Green
Right turn signal/brake lamp/hazard flasher
2. Yellow
Left turn signal/brake lamp/hazard flasher
3. Brown
Tail lamps/parking lamps
4. White
Ground
Trailer Hitch Cover
Your vehicle is equipped with a removable trailer hitch trim cover. To
remove the trim cover:
1. Loosen the two
1
⁄
4
-turn fasteners
(A) in the bottom of the cover by
turning them counterclockwise. Pull
the cover rearward to remove it; the
fasteners will remain attached to
the cover.
2. To reinstall the cover, insert the
four plastic tabs on top of the cover
into the corresponding slots (B),
and push the cover into the bumper
trim.
3. Hold the cover against the bumper trim and reinstall the two
1
⁄
4
-turn
fasteners by turning them clockwise.
A
A
B B
B
B
292
Towing
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)