Setting liftgate open height, 80 locks – FORD 2013 Explorer v.3 User Manual

Page 81

Advertising
background image

To open or close with the remote control: Press the remote
control button twice within three seconds.

To open with the outside liftgate
control button:

1. Unlock the liftgate with the remote
control or power door unlock control.
If the intelligent access transmitter
(if equipped) is within 3 feet
(1 meter) of the liftgate, the liftgate
will unlock when you press the
liftgate release button.

2. Press the control button located in the top of the liftgate pull-cup handle.

Note: Allow the power system to open the liftgate after pressing the
control. Manually pushing or pulling the liftgate may activate the
system’s obstacle detection feature and stops the power operation.

To close with the rear cargo
area control:
Press and release the
button.

WARNING: Keep clear of the liftgate when activating the rear
switch.

Setting Liftgate Open Height

1. Open the liftgate.

2. Manually move the liftgate to the desired height.

3. Press and hold the control button on the liftgate until a chime is
heard, indicating the new height has been programmed. Note: The
height cannot be programmed if the liftgate position is too low.

80

Locks

2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA
(fus)

Advertising