Using the systems, 234 driving aids – FORD 2013 Taurus v.2 User Manual

Page 234

Advertising
background image

Note:

When a vehicle passes quickly through the blind zone (typically

fewer than two seconds), the system does not trigger.

Using the Systems

BLIS

turns on when the engine is started and the vehicle is driven

forward above 3 mph (5 km/h); it remains on while the transmission is in
D (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),
the system enters CTA mode. Once shifted back into D (Drive), BLIS

turns back on when the vehicle is driven above 3 mph (5 km/h).

Note:

BLIS

does not function in R (Reverse) or P (Park) or provide

any additional warning when a turn signal is on.

CTA detects approaching vehicles from up to 45 feet (14 meters) away
though coverage decreases when the sensors are blocked. Reversing
slowly helps increase the coverage area and effectiveness.

WARNING:

To help avoid personal injury, NEVER use the CTA

system as a replacement for using the interior and exterior

mirrors and looking over your shoulder before backing out of a parking
space. CTA is not a replacement for careful driving and only an assist.

In this first example, the left sensor is only partially obstructed; zone
coverage is nearly maximized.

234

Driving Aids

2013 Taurus
Owners Guide gf, 2nd Printing
USA

(fus)

Advertising