FORD 2013 Taurus v.2 - Manual (Page 65)

•
Audio system maximum volume of 45%. A message in the audio
system is displayed when attempting to exceed the limited volume.
Also, the speed sensitive compensated volume feature will be disabled.
•
Always on setting. When this is selected, you will not be able to
disable AdvanceTrac, 911 Assist or Do not disturb feature (if your
vehicle is equipped with these features).
CREATING A MYKEY
Use the information display control to create a MyKey.
1. Insert the key you want to program into the ignition or, if the vehicle
is equipped with push button start, put the Intelligent Access key in
the backup slot; see the
Starting and Stopping the Engine chapter
for the backup slot location.
2. Turn the ignition on.
3. Access the main menu from the information display controls and
select Settings, then MyKey by pressing OK or the > button.
4. Press OK to select Create.
5. When prompted, hold the OK button until you see a message
informing you to label this key as a MyKey. The key will be restricted
at the next start.
The key is successfully programmed. Make sure you label it so you can
distinguish it from the admin keys.
To program optional settings for the key(s), see the
Programming/Changing Optional Settings chapter.
Programming/Changing Optional Settings
Note: All programmed keys can be cleared within the same key cycle in
which a key was programmed, otherwise an admin key is required to
clear the keys. To clear all keys, refer to
Clearing all MyKeys.
You can access the optional settings through the information display
control.
1. Turn the ignition on using an admin key.
2. Access the main menu and select Settings, then MyKey.
3. Use the arrow buttons to get to an optional feature.
4. Press OK or > to scroll through settings.
5. Press OK or > to make a selection.
MyKey 65
2013 Taurus
Owners Guide gf, 2nd Printing
USA
(fus)