78 security – FORD 2013 Taurus v.2 User Manual

Page 78

Advertising
background image

Wait 20 seconds and repeat Steps 1 through 8 if the key was not
successfully programmed. Take your vehicle to your authorized dealer to
have the new key programmed if you are still unsuccessful.

Wait 20 seconds and then repeat this procedure from Step 1 to program
an additional key.

Programming a Spare Intelligent Access Key (If Equipped)

Note:

A maximum of four intelligent access keys can be programmed to

your vehicle. You must take your vehicle and all access keys to your
authorized dealer to be erased and reprogrammed if you would like to
replace a previously programmed access key with a new access key, or if
you already have four access keys programmed to your vehicle.

You must have two previously programmed intelligent access keys inside
the vehicle and the new unprogrammed intelligent access keys readily
accessible. See your authorized dealer to have the spare key
programmed if two previously programmed keys are not available.

Make sure that the vehicle is off before beginning this procedure. Make
sure that all doors are closed before beginning and that they remain
closed throughout the procedure. Perform all steps within 30 seconds of
starting the sequence. Stop and wait for at least one minute before
starting again if any steps are performed out of sequence.

Read and understand the entire procedure before you begin.

1. Place the new unprogrammed intelligent
access key in the pocket inside of the
center console with the buttons facing out
and with key ring up.

2. Press the driver or passenger power
door unlock control three times.

3. Press and release the brake pedal one
time.

4. Press the driver or passenger power door lock control three times.

5. Press and release the brake pedal one time. The indicator on the

START/STOP

button should begin to rapidly flash, indicating the

programming mode has been entered and two programmed intelligent
access keys have been detected in the vehicle.

6. Press the

START/STOP

button within one minute. A message will

appear in the information display indicating that the new intelligent
access key was programmed.

78

Security

2013 Taurus
Owners Guide gf, 2nd Printing
USA

(fus)

Advertising