Traveling cut-off saw cts series, Specifications, Escription – Conair CTS 7 User Manual
Page 16
TRAVELING CUT-OFF SAW
CTS Series
TPES014/0603
SPECIFICATIONS
UGE058/0803
CTS Saw
D
ESCRIPTION
2-6
MODELS
CTS-5 CTS-7
CTS-9
Performance characteristics
Pipe capacity in. {mm} OD
5 {127}
7 {178}
9 {229}
Profile capacity in. {mm} HxW*
4 x 8 {102 X 203}
5x13 {127 X 330}
6X17 {152 X 432}
Blade size in. {mm}
18 {457}
23 {584}
27 {686}
Blade type
carbide tipped
carbide tipped
carbide tipped
Blade drive motor Hp {kW}
3 {2.2}
5 {3.7}
5 {3.7}
Feed direction
†
Right to left
Right to left
Right to left
Dimensions in. {mm}
A - Height
57 {1448}
60 {1524}
63 {1600}
B - Height to centerline
40 {1016}
40 {1016}
40.4 {1026}
C - Width
46.5 {1181}
57 {1448}
61 {1549}
D - Length
70 {1778}
88 {2235}
88 {2235}
E - Table Travel
24 {609}
24 {609}
24 {609}
Weight lbs. {kg}
‡
Installed
575 {261}
825 {374}
1700 {771}
Shipping
675 {306}
925 {420}
1800 {817}
Voltage Total Amps
§
230V/3 phase/60 Hz
9.7 A
15.1 A
15.1 A
460V/3 phase/60 Hz
4.9 A
7.6 A
7.6 A
230V/3 phase/60 Hz (servo)
26.2 A
30.6 A
30.6 A
460V/3 phase/60 Hz (servo)
13.1 A
15.3 A
15.3 A
Compressed air requirement
Pressure psi {bars}
80 {5.52}
80 {5.52}
80 {5.52}
Consumption ft
3
/m {liter/sec}
5 {2.4}
7 {3.3}
8 {3.8}
NPT fitting size
3/8 in.
3/8 in.
3/8 in.
SPECIFICATION NOTES:
* The HxW dimension is provided for guidance only. The actual capacity can vary depending on the profile you are
trying to produce.
† Left to right feed direction is available as an option.
‡ If the optional chip collection system is ordered, add 50 lbs. {22.7 kg} to to the installed and shipping weights.
§ The optional chip collection system adds 6 A on 230V models; 3 A on 460V models.
CTS-5, CTS-7 AND CTS-9
Front View
Side View
A
B
C
D
E