Conair CTS 7 - Manual (Page 8)

CTS Saw UGE058/0803
1-4
I NTRODUCTION
WARNING: Voltage Hazard
This equipment is powered by three-phase
alternating current, as specified on the machine
serial tag and data plate.
A properly-sized conductive ground wire from
the incoming power supply must be connected
to the chassis ground terminal inside the electri-
cal enclosure. Improper grounding can result in
severe personal injury and erratic machine
operation.
Always disconnect and lockout power before
opening the electrical enclosure or performing
non-routine procedures such as maintenance.
ATTENTION:
R
EAD THIS SO NO
ONE GETS HURT