Conair CTS 7 - Manual (Page 68)

Appendix B-1 (12)
P / M S o f t k e y
Pressing the soft key located under the word P/M on the
Maint. area screen. Selects the P/M area screen. Two
preventive maintenance sub-menus, Time and Cycles can
be displayed.
Time Softkey
Pressing the soft key located under the word Time on the
P/M area screen, selects the power-on time screen.
The Power-On time screen displays the total time in hours
that the machine has had the power switched on. This
information could be used for scheduling preventive
maintenance. The displayed time can not be reset.
Exit or Prev- Pressing Exit, Prev or the Softkey under the
word Exit returns the display to the P/M area screen.
S E L E C T P / M A R E A
T i m e C y c l e s
P O W E R O N 0 0 0 0 0 . 0 H r s
E x i t
Conair Servo
Traveling Saw
Operator Control
Instructions