Dell C7765DN MFP Color Laser Printer User Manual
Page 111
Output Format
111
Copy Booklet
You can output the copies of scanned documents as they are by specifying [Fold & Staple].
Select this option when you do not need a document to be copied in booklet page order.
Note
• An optional component is required to use this feature. For more information, contact Customer
Support at dell.com/contactdell.
Covers
You can attach covers to a booklet.
• Off
No cover is attached.
• Blank Cover
A blank sheet of paper is attached as the cover.
• Print on Both
The first and second pages of the document are copied on both sides of the cover.
• 1 Sided Covers Print Outside
The first and the last pages of the document are copied on the front side of the cover.
• Last Page on Back Cover
Select this check box to copy the image of the last document page onto the last page of
the copy sheets as a back cover. When you use [Divide Output] to divide a booklet into
subsets, the image of the last document page will be copied onto the last page of the last
subset.
Note
• Depending on the number of pages in the original document, a blank page may be inserted before the
last page of a booklet.
Binding Shift
Displays the [Booklet Creation - Binding Shift] screen.
Refer to "[Booklet Creation - Binding Shift] Screen" (P.111).
Divide Output
Displays the [Booklet Creation - Divide Output] screen.
Refer to "[Booklet Creation - Divide Output] Screen" (P.112).
Fold & Staple
Displays the [Booklet Creation - Fold & Staple] screen.
Refer to "[Booklet Creation - Fold & Staple] Screen" (P.112).
Note
• An optional component is required to use this feature. For more information, contact Customer
Support at dell.com/contactdell.
Paper Supply
Displays the [Booklet Creation - Paper Supply] screen.
Select the tray to be used for body pages from [Main Body Tray], and the tray for cover pages
from [Cover Tray]. Select the same size of paper for [Main Body Tray] and [Cover Tray], and
also select the trays with paper loaded in landscape orientation ( ).
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
[Booklet Creation - Binding Shift] Screen
This screen allows you to specify the binding shift value in the range from 0 to 50 mm in 1
mm increments.