Dell C7765DN MFP Color Laser Printer - Manual (Page 35)

Machine Components
35
Left side and rear views of the machine
13 Wakeup motion sensor
(pyroelectric sensor)
The wakeup motion sensor (pyroelectric sensor) works consistently, and
when it detects human presence in the detectable area, the wakeup motion
sensor (reflection sensor) starts working.
14 Wakeup motion sensor
(reflection sensor)
When the wakeup motion sensor (pyroelectric sensor) detects human
presence, the wakeup motion sensor (reflection sensor) starts working, and
when it also detects human presence, the machine exits the Power Saver
mode.
While the wakeup motion sensor (reflection sensor) detects human
presence, the machine will neither reset the settings automatically nor enter
the Power Saver mode.
15 Wakeup Motion Sensor
Access Lamp
The Access Lamp lights up while the wakeup motion sensor (reflection
sensor) detects human presence.
16 Side Tray Copies and prints are delivered here, facing up.
17 Stylus pen Used for touching the touch screen on the control panel to configure
settings.
Note • You can directly touch the touch screen not only with the stylus pen but
also with a finger.
18 Stylus pen holder Stores the stylus pen.
No. Component Function
5
6
3
4
2
1
7
9
8
No. Component Function
1 USB 2.0 interface connector
(optional)
Connects to the cable of the Memory Card Reader or a USB memory device.
2 Top left cover Open this cover to clear paper jams.
3 Upper left cover Open this cover by pressing the release lever to clear paper jams.
Note • Before you open the upper left cover, exit the Sleep mode and then switch
off the machine.
4 Bottom left cover Open this cover to clear paper jams. When Tray 6 is installed, open this
cover after moving Tray 6 to the left.