Clearing jams, Avoiding jams, Identifying the location of paper jams – Dell 3130cn Color Laser Printer User Manual
Page 177
Clearing Jams
Identifying the Location of Paper Jams
Removing Print Jams From the MPF
Removing Print Jams From the Standard Tray
Removing Print Jams From the Fuser
Removing Print Jams From the Optional Duplexer
Removing Print Jams From the Optional Feeder
Careful selection of appropriate print media and proper loading allow you to avoid most jams. See
for more information.
NOTE:
It is recommended that you try a sample first before buying large quantities of any print media.
Avoiding Jams
Use only recommended print media. See
See "
Loading Print Media in the Standard and Optional Trays
" and "
" to load printer media
properly.
Do not overload the print media sources. Ensure the stack print media height does not exceed the maximum height
indicated by the load line labels in the trays.
Do not load wrinkled, creased, damp, or curled print media.
Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try feeding one sheet at a
time through the multipurpose feeder (MPF).
Do not use print media that you have cut or trimmed yourself.
Do not mix print media sizes, weights, or types in the same print media source.
Ensure that the recommended print side is face up when you insert the print media. Also, the recommended print
side should be face down when using the MPF.
Keep print media stored in an acceptable environment. For more information, see
.
Do not remove the feeding tray during a print job.
Push all trays in firmly after loading them.
Ensure that all cables that connect to the printer are correctly attached.
Overtightening the guides may cause jams.
Wipe the feeder rollers in the trays or MPF with a cloth that is slightly dampened with water if jams caused by
misfeeding paper occur frequently.
Identifying the Location of Paper Jams
The following illustration shows where paper jams may occur along the print media path.