Dell 3130cn Color Laser Printer - Manual (Page 255)

When an unacceptable character is specified for job owner name, "Unknown User" is used as job owner
name.
NOTE: Characters acceptable for job owner name are alphanumeric characters and symbols, except for space and
colon.
NOTE: Up to 32 characters are acceptable for job owner name.
When an unacceptable character is specified for password, or when a specified password is not within
the range of the allowable character length, the authentication password is treated as not specified.
NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if
authentication setting is made with the environmental variable, it is used as setting information.
Printing (HP-UX)
This section provides information on printing from the registered logical printer during the installation.
Printing From HP-UX
To print to the default printer:
If the printer is registered as the default printer, the name of the printer can be shortened and specified as shown in
the following example.
% lp filename
To print to other printers:
To print to a printer named dell3130cn, type as follows.
% lp -d dell3130cn filename
To change the default printer temporarily for printing:
To change the default printer, set the printer name in the environment variable PRINTER.
To set a printer named dell3130cn as the default printer for printing, type as follows.
% setenv PRINTER dell3130cn
% lp filename
To print with added options:
To print with the options, specify the option of the lp command using -o as follows.
The available options are the same as txt2ps2/tiff2ps/xwd2ps2.
Depending on installed options, the available paper trays are different.
%lp -d dell3130cn -o r -o ILT filename
To print using file format:
To print text files:
% lp -d dell3130cn filename
To print XWD files:
% lp -d dell3130cn -o XWD filename