Dell 3130cn Color Laser Printer - Manual (Page 259)

YT3
Feed paper from the tray loaded with Youchoukei 3 (120 x 235 mm).
MxNmm
Feed paper from the tray loaded with MxNmm defined by users.
Possible range specified:
Width: 76.2 to 220.0 mm
Length: 127.0 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users.
Possible range specified:
Width: 3.00 to 8.66 inches
Length: 5.00 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some
cases, this option will be ignored.
-2
Sets printing to 2-column printing.
-r
Rotates the image by 90° and uses the paper in the landscape orientation.
-F
Ignores the form feed code (FF).
-llines
Specifies the number of lines per page.
-wcolumns
Specifies the number of columns per line.
-ooutcolumns
Converts print data to single-byte text and sets printing to start from outcolumns.
-Loutlines
Prints text from the outline columns.
-en
Expands horizontal tabs to n columns (space). The default is 8.
-ssize
Specifies the font size as point size. The default is 10.
-E
This function turns on the image enhancement function. For models without the image enhancement mechanism,
this option will be ignored.
-ffont
Sets the font.
NOTE: The available fonts are limited to the font in the printer. For more information, see " Understanding Fonts ."
-Nc=copies
Specifies the number of output copies (the value of copies must be a positive integer).
-cl
Specifies that printing be collated. If the copies option is not specified, this option will be ignored.
-ps